Measurement Technology There are 16 products.
Measurement technology with lasers is extremely precise and already in frequent use. Since there is no contact with the measuring object when a laser is used, soft, sticky, hot, or otherwise sensitive surfaces can be measured. There is no wear on the sensor during the process. The first step for creating perfect interior design is precise surveying. Laser measuring devices simplify workflows, enable precise transmission of process values, and increase productivity through enormous time and cost savings. Laser 2000 offers high-precision, compact, and robust laser measuring devices.
Laser Beam Profiler, 6,5 mm x 4,8 mm
DataRay's WinCamD LCM beam profile camera provides now USB 3.0 frame rates of 30Hz at very high resolution.
Dataray Analizador de perfil de gran...
Analizador de perfil de haz láser (beam profiler) por cámara para aplicaciones con haces de gran tamaño, hasta 20 x 15 mm
Laser Beam Profiler, 7.1 mm x 5.4 mm
The Beam Profiler BladeCam-XHR and WinCamD-XHR cameras are high resolution beam analysis cameras with 3 megapixels
BeamR, rot. Single Plane Scan
The scanning system BeamR with rotating slots for the measurement of lasers with diameters of 0.5 microns to about 3 mm
miniature beam profiler
The Beam Profiler BladeCam-HR is suitable with a housing depth of only 6.5 mm suited for beam profile analysis at locations with limited space.
Laser Beam Profiler, 14 mm x 11 mm
The TaperCamD-UCD12 system is specialized on the analysis of extended laser beams with a compact, high-resolution 14-bit CCD digital camera
converter optic, UV
By means of the described UV converter optics the measurement of the intensity distribution of UV laser radiation with standard Si-based CCD or CMOS cameras is possible.
converter optic, IR
Ópticas conversoras para analizar el perfil del haz láser en el infrarrojo (IR)
BeamScope P8, linear Scan
The unique in the linear scanning system BeamScope P8 is the measuring tongue of the detector. To move perpendicular to the beam propagation direction through the beam and thus performs a linear scanning motion.
Variable combined attenuator Wheel
Variable attenuator for beam profiler in the ray analysis with 99 different attenuation values in the range of 1010-0 (0 to 100 dB).
beam reducer - Afocal
This optical beam reducer to be connected to the C-mount a camera WinCamD-ray analysis is used when the beam diameter of the laser is much greater than the sensor chip or of the taper.
